Различия

Здесь показаны различия между двумя версиями данной страницы.

--- eng_web:tile_placement [2014/08/05 16:11]
julia [indents]
+++ eng_web:tile_placement [2020/09/28 22:37] (текущий)
@@ Строка 42: / Строка 42: @@
 By clicking on the arrows, you can change the position of the tiles (horizontal / vertical), turn it upside down, or turn it (45 °) angle.
-===== Tile placement =====
+--------------------------------------------------------
 There are **two ways** to place tiles on surface.
   - Use the buttons on the toolbar;
   - "A quick way" by (Drag-and-drop) dragging tiles.
-==== Placing tiles using the buttons on the Toolbar ====
+===== Placing tiles using the buttons on the Toolbar =====
 <note important>Tiling is possible on the selected surface only.</note>
@@ Строка 74: / Строка 75: @@
-=== Row above / Row below ===
+==== Row above / Row below ====
 "**Row above**" — places a row of tiles at the bottom of the selected tile.
 (if there are any tiles placed, they will be replaced)  \\
@@ Строка 80: / Строка 81: @@
 "**Row below**" - places a row of tiles on top of the selected tile.  \\  {{:eng_web:10_add_row.png|}}
-Attention! By default, the row of tiles — it is a horizontal row of tiles, as indicated by
-the position of the blue arrow when tile highlited. The row direction can be
+==== Row on the left / Row on the right ====
-changed by clicking on the icon "Change selected row type (vertical / horizontal)" in the Toolbar:
+**To insert a row on the left:**
+  - Highlight the tile in respect to which you want to place a row of tiles;
+  - Click the right mouse button on the selected tile, then click "Insert a vertical row on the left":  \\  {{:eng_web:10_add_row_1.png|}}
+Result:
+{{:eng_web:10_add_row_2.png|}}
+**To insert a row on the right:**
+  - Highlight the tile in respect to which you want to place a row of tiles;
+  - Click the right mouse button on the selected tile, then click "Insert a vertical row on the right":  \\  {{:eng_web:10_add_row_3.png|}}
+Result:
+{{:eng_web:10_add_row_4.png|}}
+<note important>Attention! When you insert vertical rows, the orientation of tiles on the surface automatically changes from horizontal to vertical. So, for example, when you try to remove or move a row, a vertical but not horizontal row will be removed.</note>
+==== Deleting tiles ====
+To delete **all the tiles** on the surface:
+  - click on any tile on the surface you want to clean;
+  - click on the icon {{:eng_web:4_del.png|}} on the toolbar or keyboard shortcuts **Shift + Del** (Delete). All the tiles will be removed from the surface.
-==== Removing tile ====
+**To delete a row:**
-"**Delete row**" - a series in which you select one or more tiles will be removed.
+  - highlight the tile in the row you want to delete;
-The same action is available with a combination of keys on the keyboard Ctrl + Delete.
+  - click **Delete row** or press the keyboard shortcut **Ctrl + Delete**.
+<note important>Attention! By default, the row of tiles - is a horizontal row of tiles. The row direction can be changed by clicking on the icon "Change type of the selected row (vertical / horizontal)" {{:eng_web:11_row_type_1.png|}} / {{:eng_web:11_row_type_2.png|}}.</note>
-"**Replace**" - replaces the selected tile to tile in "sample" window:
+==== Replacing tiles ====
+"**Replace**" - replaces the selected tile to tile in "sample" window.
+To select multiple tiles, placed near each other, select them by holding down the left the mouse button:
+{{:eng_web:12_replace.png|}}
+To select multiple tiles, placed separatly (for example, as shown above), hold on “Shift” key and click the left mouse button on all the tiles to be replaced:
+{{:eng_web:13_replace.png|}}
+==== Moving tiles =====
 "**Move area**" - by clicking on this button you can move all the placed tiles on the selected surface:
-Attention!
+{{:eng_web:14_move_area.png|}}
-To select multiple tiles, placed near each other, select them by holding down the left the mouse button.
-To select multiple tiles, placed separatly (for example, as shown above), hold on “Shift” key and click the left mouse button on all the tiles to be replaced.
-"Delete all tiles on the surface" - click on the icon - remove all the tiles on the
-selected surface.
-The same action is available with combination of keys on the keyboard Shift + Delete.
+=== Moving rows ===
 ==== Placing tiles by drag and drop ====
 To place the tiles in this way, it is enough to click the left mouse button on the needed tiles in the **Catalog**, **Tileboard** or in block "**Sample**" and drag it to the surface.
@@ Строка 211: / Строка 236: @@
 {{:eng_web:37_offsets.png|}}
-===== templates =====
+===== Pattern =====
 The pattern is used for fast placing of a set of different tiles.
-For example, in a “checkerboard pattern» or  in “check mark pattern"
+For example, in a “checkerboard pattern»:  \\  {{:eng_web:48_pattern.png|}}
+Or in “check mark pattern":  \\  {{:eng_web:49_pattern.png|}}
-To create a template:
+**To create a template**:
-) Place a check mark in the check box "Template":
+  - Place a check mark in the check box "Template":  \\  {{:eng_web:42_pattern.png|}}
-) Select the desired template by pressing
+  - Select the desired template by pressing drop-down menu (highlighted):  \\  {{:eng_web:43_pattern.png|}}  \\  Similarly, drag the tile on all of the blank cells of the template.  \\  {{:eng_web:44_pattern.png|}}   {{:eng_web:45_pattern.png|}}  \\    {{:eng_web:46_pattern.png|}}   {{:eng_web:47_pattern.png|}}  \\   {{:eng_web:49_carpet_4.png|}}  \\  You can replace one tile to another, by drag and drop the tiles from the buffer to the cell stacking template.
-drop-down menu (highlighted):
+  - Drag and drop the desired tile on the empty fields in the selected template by holding the left button of the mouse.
-Similarly, drag the tile on
-all of the blank cells of the template.
-You can replace one tile to another, by
-drag and drop the tiles from the buffer to the cell stacking
-template.
-) Drag and drop the desired tile on the empty fields in the selected template by
-holding the left button of the mouse:
 "Check mark" template is formed in a similar manner. To place the "Check mark" template, tiles should be of different width and height (not square) and placed in relation to each other - general to the narrow side.
-To rotate the tile in the block "Sample", right-click
+To rotate the tile in the block "Sample", right-click over it, and it will rotate 90 °.  \\  {{:eng_web:44_pattern_1.png|}}  {{:eng_web:44_pattern.png|}}
-over it, and it will rotate 90 °.
+It makes sense for the tiles in various patterns with different width and height.
-It makes sense for the tiles in various patterns with
-different width and height.
-Attention! If the pattern is not completely filled, a error will occur, and the tile won't be placed.
+<note tip>Attention! If the pattern is not completely filled, a error will occur, and the tile won't be placed.
-Lets look at the tiles, which are intended for such stacking.
+Lets look at the tiles, which are intended for such stacking.</note>
-Template with a border - "carpet".
+==== Pattern with a border - "carpet" ====
 The most complex pattern for placing - a pattern with a border.
 Suitable for use:
-: Elements of a collection designed for such placement (square tiles at the center, border with a width equal to sides of the central tiles, corner square inserts with a side equal to the height of the border);
+  - elements of a collection designed for such placement (square tiles at the center, border with a width equal to sides of the central tiles, corner square inserts with a side equal to the height of the border);
- tiles of equal size.
+  - tiles of equal size.
 Lets look at the tiles, which are intended for such stacking.
-) Check the box "template" and select from the drop down menu a needed option of placing:
+  - Check the box "template" and select from the drop down menu a needed option of placing:  \\  {{:eng_web:ковёр.png|}}
-) Drag and drop in the appropriate cells the tile which must be in the template.
+  - Drag and drop in the appropriate cells the tile which must be in the template.   \\  //**Check the size of the tiles, which you put in!**//  \\  {{:eng_web:49_carpet_1.png|}}  {{:eng_web:49_carpet_2.png|}}  {{:eng_web:49_carpet_3.png|}}
-Check the size of the tiles, which you put in!
+  - Select a surface and place the tiles the way you want. For exapmle:  \\  {{:eng_web:49_carpet_6.png|}}
-) Select a surface and place the tiles the way you want.
-This type of placing is most often used as a decorative inserts when placing floor tiles.
+<note tip>This type of placing is most often used as a decorative inserts when placing floor tiles.</note>
 Attention! Drag and drop the tiles exactly in the cell, with respect to which it is oriented!
-Laying the tiles from the template.
+==== Laying the tiles from the template ====
 The process of placing tile pattern similar to the normal process of placing.
-The difference lies in the fact that, depending on the shape of the pattern, 2 rows can be regarded as one row.
+The difference lies in the fact that, depending on the shape of the pattern, two or more rows can be regarded as one row.
 Further work with the tiles can occur as usual.
-Attention! Depending on the type and size of the tiles its default angle to the surface
+<note important>Attention! Depending on the type and size of the tiles its default angle to the surface may vary. You can change the angle of the placement if necessary (select tiles, specify the desired value in the "Angle" field and press Enter on the keyboard).</note>
-may vary. You can change the angle of the placement if necessary (select tiles, specify the desired value in the "Angle" field and press Enter on the keyboard).
-Examples of stacking
-"Check mark pattern" with tiles of different sizes
-Attention! When placing the template of two tiles ("Check mark pattern") different
-degree of rotation is automatically set.
-You can change the Degree of tile rotation in the manner described above.
+===== Applique =====
+"Applique" in Ceramic Web - it is an addition of a tile or template of tiles above the placed tiles.
+Applique can be a tile of any size and shape.
+**To add a Applique on the surface:**
+  - highlight the tiles on the surface over which a Applique should be installed;
+  - select the desired tile in the Tile catalog and click "**Add Applique**":  \\  {{:eng_web:55_applique.png|}}
+  - result:  \\  {{:eng_web:56_applique.png|}}
+Frame can be moved freely around the surface.  \\  {{:eng_web:57_applique.png|}}
+To make frame "anchore" to the edges of other tiles, hold it with a mouse in the area closer to the corners.
+**To delete** a frame, select it and press the **Del** (Delete) on the keyboard.
+You can add multiple frames on a surface. Example of frame:  \\
+{{:eng_web:58_applique.png|}}
 ===== Changing the size of the room. Placing tiles in space =====
-If the tiles are already placed, but you need to change the dimensions of the room, go into the "room plan" and change the size of the room.
+If the tiles are already placed, but you need to change the dimensions of the room:
-If the dimensions are increased in a big way, part of
+  - go into the "**Floor plan**";
-surface (usually the floor) can be unfilled with tiles.
+  - change the size of the room.  \\  {{:eng_web:38_edit_room.png|}}
-To fix this, go into the "Tile placement", highlight the surface with right click on the
-mouse where blank area formed, and from the context menu, select "Fill free space."
-Missing tiles will be placed.
+To change the size of the room:
+  - click in one of the wall;
+  - drag the wall.
+{{:eng_web:39_edit_room.png|}}
+{{:eng_web:40_edit_room.png|}}
+If the dimensions are increased in a big way, part of surface (usually the floor) can be unfilled with tiles.
+To fix this:
+  - go into the "Tiling";
+  - highlight the surface with right click on the mouse where blank area formed, and from the context menu, select "Fill free space."  \\  {{:eng_web:41_edit_room.png|}}
+Missing tiles will be placed.
 ===== Box and placing tiles on it =====
-In the "Tile placement" mode, ther is the possibility of constructing an object “box». More complete, this function is implemented in the mode "Object placement"
+In the "**Tiling**" mode, ther is the possibility of constructing an object "**box**". More complete, this function is implemented in the mode "**Installation of objects**".
 To create a box, the wall should be filled with tiles.
-Highlight the tile, which should be closed by the box and click the right mouse button on the selected segment:
+  - Highlight the tile, which should be closed by the box, and click the right mouse button on the selected segment:  \\  {{:eng_web:50_box.png|}}
-Select "Create a box from tiles." A dialog box will appear:
+  - Select "**Create box from tiles**". A dialog box will appear:  \\  {{:eng_web:51_box.png|}}  \\  Here, select the desired depth of the box. (The distance at which it must move away from the wall.)
-Here, select the desired depth of the box.
-(the distance at which it must
+The result is as follows:  \\  {{:eng_web:52_box.png|}}
-move away from the wall.)
-The result is as follows:
+After that, you can place tiles on the box (all the rules of tiles placement remain unchanged):  \\  {{:eng_web:53_box.png|}}
-After that, you can place tiles on the box (all the rules of tiles placement remain unchanged):
+<note important>To delete a box or move it, go into the "**Installation of Objects**" mode. In this mode, you can work with the box as with any other object: modify, move, rotate, delete.  \\
-Attention! To delete a box or move it, go into the "object placement." In this
+However, you can place tile on it only in the "**Tililg**".</note>
-mode, you can work with the box as with any other object: modify, move, rotate, delete.
-However, you can place tile on it only in the "Tile placement menu."

KERAMA MARAZZI 3D

Инструменты пользователя

Инструменты сайта

Различия

Инструменты страницы